Reconnect TV / Radio cables. For Type A
Antenna, Cut Wire tie from Blue Ethernet
Cable connected to the tube.
MAC #
SER#
RV2402 Installation (continued)
Type A Antenna
Type B Antenna
5
Wire Tie
Radio Cables
MAC #
SERIAL #
Paddle Antenna
Paddle Antenna
Paddle Antenna
Paddle Antenna
LTE Antenna
Position
LTE Antenna
Position
RV-Link Logo
Location
(topside)
Locking Screw Hole
6
TV Cables
Write down the mac address # and serial #
from the label on the back of the RV2402
in the space provided below.
6
A) To create a clean surface for the paddle
antennas, wipe down the inside of the
Wi-Fi / LTE housing with rubbing alcohol.
B) Peel off adhesive back from paddle antennas.
C) Firmly place into interior housing as shown.
IMPORTANT: Paddles should be positioned
opposite from each other for best reception.
A) To create a clean surface for the paddle
antennas, wipe down the inside of the
Wi-Fi / LTE housing with rubbing alcohol.
B) Peel off adhesive back from paddle antennas.
C) Firmly place into interior housing as shown.
IMPORTANT: 1 antenna should line up with
the housing units Locking Screw Hole.
4A
4B
Input: 12V/0.6A
FCC ID: ZGM-RV2402
IC: 23051-RV2402
RV2402 2.4G/5G WiFi & LTE
Multi-Band Extender/Repeater
Made in China
2010000000000000001
MAC:
S/N:
Patent No.:
US D855,591 S
Patent No.:
US 10,622,709 B2
