5
Remove 4 Machine Screws (
#10-24 UNC
Threaded)
and 4 Lock Washers from housing
on roof. Retain screws for reassembly.
Lift the housing off of base and disconnect
radio and TV cables.
CAREFUL - Do not let cables fall back
through antenna base into vehicle roof.
RV2402 Installation
1A
Type A Antenna
Type B Antenna
2
#10-24 UNC
Threaded
Machine
Screws
Lock
Washers
WiFi / LTE
Housing
TV Cable
Radio Cable
Paddle Antenna Connectors
Wi-Fi / LTE
Optional
GPS Port
Housing
Remove Machine Screw (#8-32 UNC Threaded
Pan Head Screw). Retain screw for reassembly.
Twist housing counter clockwise to unlock
from mounting base.
1B
#8-32 UNC Threaded
Pan Head Screw
Attach paddle antenna connectors onto the
2 outside port connectors of the RV2402 Extender
(each marked by a red dot) and secure using
a small open ended adjustable wrench.
CAREFUL - Do not over tighten.
3
