Radio Operation
11
Fader Control:
(Continued)
Note 1:
Since the fader control varies the
output of the amplifier between the front
and rear speakers, it is normal for the
overall volume of the speakers to drop
slightly when the control is centered. (All
4 speakers playing with equal power)
Note 2:
If there is only one set of speakers
used and the unit is wired properly, the
fader control will have no effect on the
loudness of the speakers.
Some programming is required at the
time of installation. Address each category
and repeat the procedures listed to cor-
rectly perform the programming.
Setting the Clock:
1. With the unit on, make sure the display
is showing the clock by pressing the “F/C”
button.
2. Press and hold down the F/C button.
3. While holding down the F/C button,
press the TUNE to set the hours and
press the TUNE ^ to adjust the minutes.
4. When the display shows the correct
time, release the F/C button and the time
will remain in memory.
Note: The clock is only a 12 hour clock so
there is not an indicator for AM or PM.
SEEK
AS
BAND
F/C
3
6
TUNE
UP
DOWN
FM
AM
☛
☛
Minutes
^
Programming the Unit
SEEK
AS
F/C
3
6
M9000/M9050H
☛
Hours
M9000 / M9050H
M9000/M9050H/-2 08/04/00 7:58 AM Page 11
