Magmaweld MONOSTICK 200i PFC, Руководство пользователя

Страница: 29 / 36

Figure 2: TIG Welding Connections
AR
1.0
1.6
6.3
9.5
15 - 70
30 - 150
6 - 8
6 - 8
Ÿ
Install the Argon gas regulator onto the Argon gas
cylinder.
Ÿ
C onnect the gas hose of the torch to the gas
regulator .
Ÿ
Adjust the desired current and the machine is
ready to weld.
Ÿ
TIG torch with a valve should be
used.
Ÿ
Connect the TIG t orch power
cable to the negative welding
socket (5) and the earth cable to
the positive welding socket ( 6 ) of
the machine.
Figure 3: Connecting Gas Cylinder
27 MONOSTICK 200i PFC
Ÿ
SWITCH ON the machine via power switch (1) and
check if power LED (2) lights up and cooler fan
works.
While inserting the plug into the
socket, pay attention that main
switch is positioned to “OFF” “0”.
Before plugging your machine to the
electrical line, check if the correct
voltage exists.
INSTALLATION AND OPERATION
2.4 CONNECTIONS FOR TIG WELDING
Diameter of
Electrode
(mm)
Diameter of
Nozzle
(mm)
Welding
Current
(A
DC
)
Gas Debit
(lt/min)