Magmaweld megaMIG, Руководство пользователя

Страница: 27 / 132

27
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
megaMIG
EN
• Make sure that the torch shield is
correctly fitted to the machine
• If the problem continues, contact the
authorized service
• Torch shield may not be installed or
properly fitted
E27
Torch Shield Not
Installed
E07
E11
E08
E12
E13
E09
E10
System Error
System Error
Wire Feeder Error
Torch Connection
Error
• Contact the authorized service
• Contact the authorized service
• Check wire basket, reel / reel press
and torch connections
• If the problem continues, contact the
authorized service
• Check torch and torch connections
• If the problem continues, contact the
authorized service
• There may be a hardware error
• There may be a hardware error
• There may be an error in wire feeding
• The torch or torch connections
may be faulty
Error Code Error Cause Solution
E19
Thermal
Protection
(Secondary)
• Visually check if the fan is working
• If the problem continues, contact the
authorized service
• Unblock the front of the air ducts
• If the problem continues, contact the
authorized service
• Fan may not be working
• The front of the air inlet - outlet ducts
may be blocked
• The machine working environment
may be too hot or stuffy
• The duty cycle of your machine may
have been exceeded
• Make sure that the working
environment of the machine is not
excessively hot or stuffy
• If the problem continues, contact the
authorized service
• Allow the machine to cool down by
waiting for a while. If the fault
disappears, try to use the machine at
lower amperage values
• If the problem continues, contact the
authorized service
E26
• Check your air / gas connections,
make sure that the inlet pressure
is appropriate. If the inlet pressure is
normal, contact the authorized
service
• Inlet pressure may be low
Inlet Pressure
Low
E14
E16
E17
E18
E20
E21
E22
E23
E15
System Error
System Error
System Error
Remote Control
Communication
Error
• Contact the authorized service
• Contact the authorized service
• Contact the authorized service
• Check remote control connections
• If the problem continues, contact the
authorized service
• There may be a hardware error
• There may be a hardware error
• There may be a hardware error
• There may be an error in the remote
control connections
Maintenance and Service