EN
www.magmaweld.com
27
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
3.3 Remote Control
With a torch with suitable properties and a connector, you can also change your welding current (wire speed) / welding voltage through the torch
without going near your machine. Connect the remote control torch socket.
Socket connections are as follows :
Mode
Classic Mode
Smart Mode
Synergic Mode
1
You can reduce your wire speed to the minimum tolerance value (-10%).
Setting Range :
0.5 m/min
1
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range :
5 A
1
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range :
5 A
You can increase your welding voltage up to the maximum tolerance value
(+10%).
Setting Range :
0.5 V
You can increase your wire speed up to the maximum tolerance value (+10%).
Setting Range :
0.5 m/min
2
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range :
5 A
2
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range :
5 A
2
A
You can increase your welding voltage up to the maximum tolerance value (+ 10%).
Setting Range :
0.5 V
A
You can increase your welding voltage up to the maximum tolerance value (+10%).
Setting Range :
0.5 V
A
You can reduce your welding voltage up to the minimum tolerance value (-10).
Setting Range :
0.5 V
B
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range :
0.5 V
B
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range :
0.5 V
B
Button
Position
A
B
1
2
Operation
Содержание ID 500 M PULSE SMART
Страница 159: ......
