EN
www.magmaweld.com
ID 250TW DC PULSE / ID 300TW DC PULSE
11
USER MANUAL | KULLANIM KILAVUZU
Technical Information
1.3 Product Label
As defined in the standard EN 60974-1, the operating cycle rate includes a time period of 10 minutes. For example, if a machine specified as 250A
at %60 is to be operated at 250A, the machine can weld without interruption in the firs 6 minutes of the 10 minute period(zone 1). However, the
following 4 minutes should be kept idle for the machine cool down (zone 2).
Duty Cycle
X
Open Circuit Voltage
U0
Rated Welding Current
I2
Line Voltage and Frequency
U1
Protection Class
IP21S
Rated Welding Voltage
U2
Input Power
Insulation Class
S1
CL.I.
Input Current
I1
Three Phase Transformer Rectifier
Horizontal Characteristic
Direct Current
MIG / MAG Welding
Mains Input-1 Phase Alternating Current
Suitable for operation at hazardous
environments
