MAGMATIC PM-DMX1, Руководство пользователя

Страница: 9 / 24

9
MAINTENANCE GUIDELINES
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output,
and an extended life. The frequency of cleaning depends on the environment in which
the fixture operates: damp, smoky, or particularly dirty environments can cause greater
accumulation of dirt on the device. Clean periodically with a soft cloth to avoid dirt/
debris accumulation.
NEVER
use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life.
There are no user serviceable parts inside this fixture. Please refer all other service
issues to an authorized MAGMATIC service technician. Should you need any spare parts,
please order genuine parts from your local MAGMATIC dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every three months, to
make sure the circuit contacts are in good condition in order to prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may
fall out during normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, rigging hardware, and rigging points (ceil-
ing, suspension, trussing). Deformations in the housing could allow for dust or liquids
to enter into the device. Damaged rigging points or unsecured rigging could cause the
device to fall and seriously injure a person(s).
• Electric power supply cables must not show any damage, material fatigue, or sedi-
ments.
NEVER
remove the ground prong from the power cable.