MAGMATIC PM-DMX1, Руководство пользователя

Страница: 8 / 24

8
WARNING: When using electrical appliances, basic precautions should be followed,
including the following:
• Read all instructions before attempting to operate the device.
• Device must be connected to a properly grounded power outlet.
• To reduce the risk of electical shock,
DO NOT
expose the appliance, cord, or plug to
water, moisture, or liquids of any kind.
• To reduce the risk of injury, close supervision is necessary when the device is operated
in the presence of children.
• DO NOT TOUCH any moving parts.
• Use only attachments that have been recommended or sold by the device manufac-
turer.
• This device is intended for indoor usage only. Outdoor usage will void the manufactur-
er’s warranty, and any damage incurred will not be subject to warranty repairs.
• ALWAYS turn all controls to the off position before unplugging the device.
• DO NOT TOUCH
the fixture housing during operation. Turn OFF the power and allow
approximately 15 minutes for the fixture to cool down before servicing.
• DO NOT
shake fixture, and avoid brute force when installing and/or operating fixture.
• DO NOT
operate fixture if the power cord is frayed, crimped, damaged and/or if any of
the power cord connectors are damaged and do not insert into the fixture securely and
with ease.
• NEVER force a power cord connector into the fixture. If the power cord or any of its con-
nectors are damaged, replace it immediately with a new one of the same power rating.
• DO NOT
operate if the device malfunctions, or if the device has been dropped or dam-
aged in any way. Contact Magmatic service to arrange examination, repair, or electrical
or mechanical adjustment.
DO NOT ATTEMPT REPAIRS YOURSELF.
• DO NOT block any air ventilation slots.
• All fan and air inlets must remain clean and free of dust and debris.
• Allow approx. 8” (20cm) between fixture and other devices or a wall for proper cooling.
• When installing fixture in a suspended environment, always use mounting hardware
that is no less than M10 x 25 mm, and always install fixture with an appropriately rated
safety cable.
• Always disconnect fixture from main power source before performing any type of ser-
vice and/or cleaning procedure.
• Only handle the power cord by the plug end, and NEVER pull out the plug by tugging the
wire portion of the cord.
• Consistent operational breaks will ensure fixture will function properly for many years.
• ONLY
use the original packaging and materials to transport the fixture for service.
DO NOT DISCARD THESE INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH
THE DEVICE FOR REFERENCE.
SAFETY GUIDELINES