1-800-MAGLINE (624-5463)
Page 25 www.magliner.com
CooLift
®
Area
Description
Method of
Inspection
Normal Condition
Findings
Pass or
Fail
T
iming
Notes
Suspension
Mounting hardware is tight
•
Front wheel yoke
•
Rear caster frame
•
Main axle mounts to frame and
axle clamp
•
Cotter pins for main wheels
Manual inspection
All hardware is tight
Monthly
Linkage System
Hardware is properly installed
and undamaged
•
Spring pins
•
W
ashers
•
Springs
V
isual inspection
All hardware is in place and in good
condition
Monthly
Linkage System
Link pins
V
isual inspection
•
Pins are straight with no signs of wear
•
Pin plating is not cracked or damaged
Monthly
Linkage System
Links
•
Minimal play between pins and
bushings
•
Bushings are not working out
of links
Manual / V
isual
inspection
•
Links are straight with no signs of
damage or wear
•
Minimal play between pins and links
•
Bushings are flush with side of the
links
Monthly
Linkage System
Link pins are not loose in deck,
frame or sync links
Manual inspection
Minimal play between pins and deck,
frame and synch links
Monthly
Operator Interface
Internal mounting hardware is
tight
•
V
ertical slide cover screws
•
V
ertical slide mounting screws
•
Guide block cotter pins in rod
•
Pump mounting plate
•
Pump mounting screws
•
Pump band clamp
•
Battery box mounting screws
Manual inspection
Components are tight to mounting
surfaces
Monthly
Operator Interface
Brushes
•
In front of enclosure
•
In door
V
isual inspection
•
Brushes are not worn or damaged
•
Brushes are properly positioned in
holders
Monthly
Electrical
Switch panel
Manual inspection
•
No loose components
•
Cover for charger port is intact
Monthly
W
elds
Frame - general
V
isual inspection
No cracks or damage
Monthly
W
elds
No cracked welds
V
isual inspection
No cracks or damage
Monthly
