1. GENERAL SAFETY RULES
Keep the packed machine in a dry place, not exposed to atmospheric agents and in conditions in which the temperature
does not go below 5°C.
Do not stack more than three items of the same kind. Do not place heavy items on the packaging.
The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within reach of
children, as they are potential sources or danger.
Before connecting the equipment, check that the data on the machine corresponds to that of the electrical supply
network.
Adaptors, multiple sockets and/or extensions must not be used.
In doubt, request an accurate control of the plant by qualified personnel. The electric plant must be preovided with the
following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption capacity
- efficient earth leakage protection circuit breaker.
Install the pachine on a water repellent surface (laminate, steel, ceramic, etc.) away from heat sources (oven, cooking
stove, fireplace, etc.) and in conditions in which the temperature may not go below 5°C. KEEP WARM.
In an emergency, such as the breaking out of a fire, unusual noise, overheating, etc., take immediate action,
disconnecting the power and closing gas and water taps.
Only use original spare parts in order to avoid compromising the safety and proper functioning of the machine.
Do not leave the machine exposed to atmospheric agents of place them in damp rooms such ad bathrooms.
Do not obstruct the suction or dispersion grilles and do not cover with cloths, etc.
WHEN THE COFFEE MACHINE REMAINS UNATTENDED, IT IS NECESSARY TO MAKE
SURE THAT WATER FEED IS INTERRUPTED (CLOSE WATER TAP).
2. DESCRIPTION
The machines in the ES/MS series have been designed to prepare express coffee and hot beverages.
A positive-displacement pump inside the machine powers the heater in which the water is heated. By pressing the
appropriate buttons, water in supplied to the spouts in the form of hot water or steam, according to needs.
The machine is composed of a steel carryng structure on which the mechanical and electrical components are fitted.
These are completely covered with panels in stainless steel.
The beverages are dispensed at the front of the machine, where al the buttons, control devices and dispensers are to be
found. There is a cup-warming plate on the top of the machine.
Electric safety devices
The safety devices included are:
low 5V buttons on the ES button panel;
thermal protection on the pump motor;
gas failure thermocouple and thermocouple therlostat automatically closing gas tap;
thermal resistance.
Mechanical protective devices
The machine is equipped with the following protective devices:
panelling complete with protection of the parts subject to heat and of the steam and hot water cupplier;
cup-warmer plate with a tray for collecting spilt liquids;
work surface with grill and tray for collecting spilt liquids;
buttons in a safe place above the dispensing area; expansion valve on the hydraulic system and valve on the boiler to
avoid overpressure;
nonreturn valve on the hydraulic sustem to avoid reflowing to the power supply.
Vibrations
The machine is supplied with rubber vibration damping feet. In normal working conditions, the machine does not
produce vibrations harmful to the operator and the environment.
Aerial noise
Noise level in the working place does not usually exceed 70dB(A).
6
