25
Use of nozzles for potato flapjacks, slicing and shredding
A nozzles for potato flapjacks, slicing and shredding are intended for processing of vegetables
or fruit.
1. Slide the drive shaft onto the axis of the bowl. Place the disc on the drive shaft.
2. Install the gear cover on the bowl and turn the gear cover clockwise until it stops.
3. Install the motor unit to the gear cover, the correct position of the clamps.
4. Set the desired speed for the regulator.
5. To turn on the device, press and hold the power button or «Turbo».
6. Lower the products to be recycled into the feed opening and push them with a small push.
Using a dicing attachment
Use this attachment for slicing fruits and cooked vegetables.
During operation, use only the pusher that is included in the delivery set; It is forbidden to use
any other objects for pushing, in any case do not push products by your hands.
Do not process solid and frozen foods. This may damage the cube attachment.
Product type
Weight, g
Meat
200
15
Herbs
50
8
Cheese
100
10
Cookies
150
8
Nuts
150
15
Onions
150
8
Bread
75
8
Fruits
200
10
Approximate processing
time, sec
EN
7. After using the device, wait until the disc rotation has completely stopped.
8. Unplug the power cord from the electrical outlet. Disconnect the motor unit from the neck of
the reducer cover.
9. Remove the reducer cover.
10. Carefully pull out the disc.
11. Remove the chopped products from the combine bowl.
12. After finishing the work, wash the reducer cover, the bowl of the combine and the disk and dry
them thoroughly.
1. Insert the cube grid into the clamp and lock it.
2. Install the clamps inside the work bowl.
3. Install the dicing knife on the clamp.
4. Install the reducer cover on the bowl and turn the reducer cover clockwise until it stops.
5. Install the motor unit on the reducer cover, the correct installation is indicated by the click of
the latches.
6. Insert the plug into the outlet.
7. Use the regulator to set the desired speed.
Содержание MG-640
