7
Injuries and material damage
Only place camera on sturdy surfaces
. The camera could otherwise fall or topple over, causing damage or
injury.
Do not operate camera whilst running or driving.
You could fall or cause a traffic accident.
Only use USB power adaptor specified for the camera.
No liability shall be accepted for damage caused by
the use of an incorrect USB power adaptor.
The
230V socket used for the power supply
must be accessible at all times so that the power supply can be
quickly disconnected from the mains if necessary.
Ensure adequate ventilation and do not cover the power supply (not supplied) to prevent overheating.
Do not place any open ignition sources, such as lit candles onto or close to the device.
Ensure that the
LCD display is not subjected to impacts or concentrated pressure
. This could damage the
glass of the display or cause the display liquid to leak out. In case of the liquid coming into contact with eyes or skin,
rinse immediately with clean water. In case of contact with eyes, consult doctor immediately.
Damage to the electronics, display or lens caused by
external influences
, such as electric shocks, falls or others
are not covered by the warranty and shall thus be charged for.
Do not activate flash close to other persons´ eyes,
as this could damage eyes.
Do not drop or bump camera
and always handle with due care as the camera could otherwise be damaged.
