26
27
IRL
UK
Start
Start
IRL
UK
Assembling the IP security camera
Using the supplied wall fixing, install IP security camera at a
fixed location.
Note!
Danger of material damage!
Incorrect use of the IP security camera during
assembly can cause the IP security camera to be
damaged.
− Do not place IP security camera directly next to electro-
nic devices as this could produce interference. In case of
picture interference, test IP security camera at another
location.
− Select the installation site for the IP security camera so that
the lens is not exposed to sun light.
− Hold the plate of the wall fixing containing holes against
the surface of the selected installation site and mark the
holes on the surface, using a pencil.
−
Before drilling any holes, check to ensure there are no
electrical cables, gas or water pipes beneath the surface to
be drilled.
−
To
drill suitable holes, use a 6 mm masonry drill for dowels
in stone or concrete surfaces or a 3 mm wood drill for
timber surfaces.
−
After drilling the holes insert supplied wall plugs into
holes so that they are flush with the surface.
−
Secure wall fixings with supplied bolts.
Secure IP security camera
Using the four bolts, secure the IP security camera to the re-
taining plate of the wall fixing. Align the IP security camera as
desired.
Complete camera assembly
Power is supplied via a network cable and the provided
mains adapter for each feed-in (PoE – Power over Ethernet).
The network cable can be up to 100 m long.
Connect IP security camera and PoE adapter using supplied
LAN cable and plug it into the left socket (PoE) of the PoE
adapter. The IP security camera is now connected to power.
Fig.: 1
Fig.: 2