15
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: CRB-100
PRODUCT CODE: 48144
12/2014
While listening to a radio station you would like to save as a pre-set, press and hold one
of the buttons numbered 1-6 until the preset station number is shown. The button you
pressed is now the preset button for that station.
Automatic store / Preset scan
Automatic scan and store:
While listening to the FM Radio, press and hold the F/PS
button for 3 seconds. The receiver will automatically scan and save the station listening
to. While listening to the AM Radio, press and the F/PS button for 3 seconds. The receiver
will automatically scan and save the station you are listening to.
Scan saved stations
: Press the F/PS button once to perform the scanning functions. In
FM mode, press the F/PS button and the stations in that FM band will be scanned; press
the button in AM mode and scan the band stations of that AM Band.
Local / DX
Press SEL button repeatly until the display shown “LOC”. Rotate the VOL button to choose
“LOC ON“ or “LOC OFF”.
LOC ON
: Showing on the display, means local reception is turned on;
LOC OFF
: Showing on the display, means distant reception is turned on. Local and
distance reception setting can facilitate the radio reception, depending on the location
in which the radio is being used.
6.4. RDS Operation
RDS function
RDS (Radio Data System) service availability varies with areas. Please understand if RDS
service is not available in your area, the following service is not available, either.
AF-Alternative frequency
In RDS mode, press the AF button on the panel to turn the AF function on or off. When
the radio signal strength is poor, enabling the AF function will allow the unit to same
PI (Program Identification) as the current station but with stronger signal strength, so
that you do not have to retune the stations when driving between different transmitter
coverage areas. When AF symbol is on, it means RDS information is received; when AF
symbol is flashing, it means RDS information is not yet received.
PS (Program Service Name): the name of the station will be displayed instead of
frequency. If RDS service is not available in your area, turn off the AF mode. Default
setting is ON.
Remarks: In case there is no AF button on the front panel, press and hold the volume
button to turn AF on or off.
In RBDS mode, no AF function.
