14
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: CRB-100
PRODUCT CODE: 48144
12/2014
Beep function
Press SEL button until the “BEEP” shown on the screen. Rotate the VOL button to choose
“BEEP OFF” or “BEEP ON”. “BEEP OFF” means Beep function is inactive. “BEEP ON” means beep
sound will be heard when any button pressed.
Clock
Press and hold the SEL button, the clock will show on the display. Then press and hold the
button until the hours blinks on the display, rotate the SEL knob to set hours, then press the
SEL button until the minutes blinks and rotate the SEL knob to set.
Reset
The unit is equipped with memory for settings even when the battery power is
disconnected. To reset the unit for default settings, press and hold the MOD + BND buttons
when the unit is off.
Switching US/EURO frequency
Press and hold SEL button and switch radio frequency of US/EURO in the menu.
6.3. Radio operation
Choose Radio Band
Press the BND button anytime to access the radio function.
The unit comes with five bands, three FM Bands (FM1, FM2, and FM3) and two AM bands
(AM1, and AM2). Each of the five bands can store up to six preset stations, for a total of 30
preset memory stations.
Radio tune / Seek function
In Radio mode, press and hold the
or
, manual seek will be activated and the radio
frequency will proceed by one step.
Press the SEEK
or
button once, and the radio will seek the next strong and clear
frequency station. Repeat to seek more stations in your listening area with a strong signal.
Mono / Stereo reception control
In FM radio mode, Press SEL button repeatly until the display shows “MONO” or “STEREO”.
Roate the Vol button to choose the reception control, the word “MONO” shown on the
screen indicating the mono reception is received.
Save your preset stations
There are six numbered preset buttons which can store and recall stations for each band.
