9)
CLEANING & REMOVING COIN JAMS
The iCoin allows full access to the internal coin
path for cleaning or to remove a coin jam that
the Coin Release Mechanism was not able to
remove.
To gain access to the internal coin path you
must first remove the screw that holds the Coin
Release Mechanism to the body of the iCoin as
shown in figure 9.1. Remove the screw while
holding the Coin Release Mechanism to prevent
it from turning. Once the screw is fully removed
the 3 components of the Coin Release
Mechanism will be loose so place them aside.
The right side of the iCoin can now be opened
a full 90° to gain access to the complete
internal coin path for cleaning or removal
of any coin jam as shown in figure 9.2.
Do
not open the side more than 90°
otherwise damage to the hinge may
occur voiding any warranty.
For cleaning use a cotton swab or soft cloth
with isopropyl alcohol or Windex to clean
the coin path and the sensor.
Do not use
any sharp objects or abrasive cleaners
that my damage the sensors or the coin
path.
When reinstalling the Coin Release
Mechanism, ensure that the components are
assembled in the correct order as shown in
figure 9.3.
Screw
Holding
Coin
Release
Mechanism
figure 9.1
figure 9.2
figure 9.3
