
GENERAL INFORMATION REGARDING THE INSTRUCTION MANUAL
REVISIONE: X51-1213 EN
3
MAGIDO GROUP S.r.l.
User information
1
- This manual reflects the machine's current state of the art and as such cannot be considered inadequate
simply because it is updated based on new information.
2
- The Manufacturer reserves the right to update products and manuals, without any obligation to update
previous products or manuals.
3
- The characteristics of materials can be modified at any time without prior notice in light of technical
developments.
4
- In the event that the machine is supplied without electrical controls and protection systems (electrical panel
on board the machine), the manufacturer assumes no responsibility regarding safety issues arising from
electrical parts that do not comply with the recommendations and/or instructions. In all cases, compliance
with laws and regulatory standards for electrical equipment supplied with the machine shall be the sole
responsibility of the customer, who shall implement such measures in a workmanlike manner and suitable for
their use.
5
- The manufacturer shall be exempt from any possible liability in the event that the machine is subjected to:
-
improper use;
-
use by untrained personnel;
-
use contrary to the terms of this manual;
-
use contrary to regulatory standards and legislation in force;
-
use with the absence of primary power;
-
use with serious deficiencies in maintenance;
-
use with modifications or unauthorized changes unless explicitly provided in writing by the
Manufacturer;
-
use with non-original spare parts or not specifically defined for the machine model;
-
use with a total or partial non-observance of the instructions contained in this manual.
6
- The general warranty shall be void in the case of:
-
poor storage and maintenance;
-
inconveniences due to misuse;
-
use by unskilled persons;
-
exceeding of performance limits;
-
excessive mechanical and/or electric and pneumatic stress;
-
use in non-optimal conditions described in Section 5.
Any requests for additional copies of this document must be made through a purchase order submitted to
Magido Group Srl.
Содержание X51 Series
Страница 1: ...Handbok SM DELSTV TT L35 08C L55 08CM L90 08 L102 08...
Страница 49: ...49 Sm delstv tt L35 08C L55 08CM L90 08 L102 08...
Страница 50: ...Box 207 532 23 Skara...
Страница 52: ...CONTENTS NOTE...