![background image](http://html1.mh-extra.com/html/magicfx/shot-base-dmx/shot-base-dmx_manual_3496435017.webp)
User documentation MAGICFX® Shot Base DMX
Page 15
It is possible to switch off the buttons for
safety reasons.
Keep the Lock button pressed down for 5
seconds to switch the buttons on or off.
The machine is locked when an L appears in
the screen as pictured on the left.
Now the address behind Output 1 will
start flashing on and off. You can set this
in the same way as the Safety address.
If at the first setting you have opted for
Set
addresses by sequence
and you have
completed the stage, then you are finished
with the step-up.
If you have opted for
Set addresses
individually
then you repeat the action until
all addresses have been set.
It is not possible to set one of the output
addresses at the same address as the
Safety address. If you use the
Set
addresses by sequence
option make sure
that you always chose an output address
that is 1 higher or 4 lower than the set safety
address.
9.
Содержание SHOT BASE DMX
Страница 1: ......
Страница 2: ...PRODUCT CODE MFX0350 VERSION 1 0 DATE 26 02 2013...