![background image](http://html1.mh-extra.com/html/magicfx/shot-base-dmx/shot-base-dmx_manual_3496435015.webp)
User documentation MAGICFX® Shot Base DMX
Page 13
To switch on the machine, turn the switch
on the Shot Base DMX to the
‘on’
position.
The display will show the screen on the
left for one 1 second.
5.
Connect the other end of the DMX cable
(male plug) to a professional DMX
controller.
Make sure that you always place the
controller is such a way that the operator has
full sight of all the connected machines.
Consult the manual of your DMX controller
for instructions and safe use.
4.
Connect a 3-pin DMX cable to the Shot
Base DMX.
No more than 1200m distance is permitted
between the controller and the receiver.
Furthermore, no more than 32 DMX
receivers may be connected to 1 DMX
sender.
Maintain these standards for a faultless
operation.
If required you can connect several
machine to each other by using 3-pin
DMX cables
3.
Check if the on/off switch is in the ‘off’
position and then connect the electricity
cable. The Shot Base DMX runs on 230V~
50/60Hz. You will need a powerCON plug
to be able to provide the Shot Base DMX
with electricity. The Shot Base DMX is
also equipped with a powerCON output.
By connecting a powerCON loop cable
(MFX0309) to this you can connect
several machines to the same electricity
source.
2.
Содержание SHOT BASE DMX
Страница 1: ......
Страница 2: ...PRODUCT CODE MFX0350 VERSION 1 0 DATE 26 02 2013...