5
IMPORTANT
Only use the mains power adaptor and telephone
line cord supplied with the product.
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for access
to emergency services.
Setting up the base and handset
1. Plug the power adaptor and telephone cable into the
underside of the base.
2. Plug the power adaptor into the mains wall socket
and switch the power on.
3. Remove the battery cover from the back of the
handset and insert the 2 x AAA rechargeable batteries
supplied. Please note the ‘+’ and ‘-’ markings inside
the battery compartment and insert the batteries the
correct way around. Slide the battery compartment
shut.
WARNING
Never use non-rechargeable batteries. Only use the
approved rechargeable batteries supplied. Using
unapproved batteries will invalidate your guarantee
and may damage the telephone. If you are unsure,
please call the helpdesk on 0845 833 1673.
4. Place the handset onto the base to charge for at least
24 hours. Your Torque handset has ‘reverse charging’
and so can be placed either way around on the base.
Check that the round connector on the back of the
handset is in contact with the round connector in the
middle of the base. When the handset is fully charged
the battery icon in the top right of the display will
indicate this.
5. After 24 hours, plug the telephone line cord from the
Torque base into the telephone wall socket.
Torque multipack users only:
Place each Torque charger within reach of a mains
power wall socket.
1. Plug the mains power adaptor into the power socket
on the underside of the charger and plug the other
end into the mains power wall socket.
P R O D U C T S E T U P
Torque User Guide.indd Sec1:5
Torque User Guide.indd Sec1:5
5/2/10 17:13:59
5/2/10 17:13:59
