EN
9
-
UART
CONNECTOR 6 - black
-
Antenna
CONNECTOR 7 - blue
-
Temperature sensor
CONNECTION 8 - blue
CONNECTOR 9 - white
-
LED indication
CONNECTOR 10 - white
-
RPS sensor
-
Shock sensor
CONNECTOR 11 - red
1 – black
- grounding
2 – white
- shock sensor input – second level (-)
-
Additional sensor
1 – black
- grounding – In case of turning the alarm or the additional sensors off, the grounding is
disconnected which means the sensor is mains operated.
2 – white
- input of additional sensor reacting on (-)
3 – red
- power supply of +12 V
V. CONNECTING OF CLUTCH SENSOR
This connecting is needed in case the car, when
starting, requires the clutch pedal to be pushed
down. The relay is connected to the ignition wire
and the by-pass wire. The wire – during starting
– is grounded. In this case, the option AUX2 as
bypass in Programming menu 2-10 must be ON.
CONNECTOR 12 - green
87 87a
Switch circuit
CN1-3 ignition
86
CN5-2 bypass (-)
clutch-
switch
3 – red
- power supply of +12 V
4 – yellow
- shock sensor input – first level (-)
30
85
