- Take extra care to avoid injury when handling the knife unit, removing it from the mixing bowl or grinder,
emptying the mixing bowl and cleaning. The blade of the knife unit is sharp.
- Before removing the mixing bowl or grinder from the motor unit, make sure that the motor unit is
switched off, unplugged and that the rotating parts have stopped.
(*) Authorized service: The manufacturer's or importer's service department or another person who is
qualified, authorized and qualified to perform this type of repair. The "smoothie" table blender must be
handed over to such a service in the event of a repair.
HOW TO OPERATE
BEFORE FIRST USE
- Remove the appliance and its accessories from the packaging.
- Thoroughly wash all food contact parts with warm water using a neutral kitchen detergent. Then rinse them
under clean running water and wipe dry thoroughly with a soft cloth or let them dry freely.
ASSEMBLY
- Before starting to install or remove the appliance, make sure that the motor unit is switched off and
unplugged and that the rotating parts of the appliance are not moving.
Assembly and disassembly of the mixing jar:
- Insert the blades unit into the holder of the blending unit. Then place the seal on the blades unit and make
sure it fits snugly.
- Place the mixing jar holder with the inserted blades unit and the seal on the bottom of the mixing bowl and
screw it to it.
- Insert the cap into the hole in the lid and turn it clockwise to fasten it. Then close the glass jar blender with
the lid assembled in this way. In order for the lid to adhere well to the mixing container jar blender, the lid
must be pressed firmly around its entire circumference.
- To remove the mixing jar, proceed in the opposite way.
Assembly and disassembly of the blending unit to the motor unit:
- Place the motor unit on a flat and dry surface (eg kitchen worktop).
- Mount the assembled blending jar on the motor unit.
- To remove the blending jar from the motor unit, simply lift it upwards.
APPLIANCE OPERATION
- Assemble the blender according to the above procedure.
- Put food or pour the liquids you want to mix into the blending jar.
- Close the jar with a lid.
- Note:
The maximum capacity of the mixing bowl is 1.75 l / 500 g. We do not recommend filling the mixing
bowl with liquids larger than 1.5 l / 250 g. Liquids that gain more volume during mixing are better processed
gradually in smaller batches.
- Connect the appliance to an electrical outlet.
- Use the speed control to set the required gear. First, we recommend setting a lower gear to blend the
individual foods in the container.
- Hold the lid from above with one hand while blending.
- Warning:
The maximum operating time of the appliance is 1 minute. Do not leave the appliance running
continuously for longer than the above. Then let the appliance cool down for at least 2 minutes.
- Food or liquids can be added to the blending jar during blending process. Simply unlock the lit by turning it
counterclockwise and then pull it out.
- If food sticks to the blades unit or the walls of the jar, switch off the appliance by turning the speed control
to the OFF position and disconnect it from the main socket. Make sure that the blade unit has stopped
Содержание 801577
Страница 29: ...4 24 4 4 24 4 roky...
