MAGIC FX PSYCO2JET, Руководство пользователя и инструкция по установке

Страница: 27 / 40

MAGICFX
®
PSYCO2JET — User and Installation Manual 27
3.5 SETUP MULTIPLE MACHINES IN A SEQUENCE
1. Connect a power link cable to the power output.
2. Connect the other end to the power input of the next machine.
PowerCon TRUE1 female PowerCon TRUE1 male
POWER
POWER IN POWER OUT POWER IN POWER OUT
3. Connect a DMX cable to the DMX output.
4. Connect the other end to the DMX input of the next machine.
5-pole female
DMX IN DMX OUT DMX IN DMX OUT
5-pole male
DMX
5. Use the display and buttons or a RDM controller to set the machine into RAW
or PRESET mode and to assign DMX addresses, see chapter 1.
6. Repeat steps 1 – 5 for each subsequent machine.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.