background image

MAGICFX

®

 PSYCO2JET 

 

User and Installation Manual

  17

WARNING

Inadequate installation and/or operation of a CO

2

 powered 

machine and CO

2

 cylinders can lead to death or serious injury. 

Always follow the instructions from this manual, from your CO

2

 

supplier and from local authorities.

2.3 

INDOOR USE

The MAGICFX

®

 PSYCO2JET is designed for outdoor use and use in well-ventilated 

indoor spaces. When used indoors, make sure you take the necessary preparations. 
These preparations could include, but are not limited to:

•  Consulting your CO

2

 supplier.

•  Calculating the reduction of oxygen for the indoor space.
•  Checking the location for spots where CO

2

 could accumulate and taking 

preventive actions.

•  Installing CO

2

 monitoring devices that will warn for hazardous CO

2

 levels.

DANGER

Do not use the MAGICFX

®

 PSYCO2JET in poorly ventilated 

confined spaces. Exposure to high levels of CO

2

 gas can cause 

symptoms like headache, nausea, loss of consciousness or even 

death.

2.4 

RIGGING

Please follow the European and national guidelines for safe rigging and trussing.

2.5 

NOISE LEVEL

The environmental noise level as measured at the ear is 118 dB(A). This level of noise 
is only reached during the short instances that the CO

2

 output is active. Therefore 

hearing protection is not necessary.

WARNING

Do not operate the MAGICFX

®

 PSYCO2JET close to yourself or to 

others for a long period of time. If you experience any hearing 

loss or ringing in the ears, you should immediately stop using the 

unit.

Содержание PSYCO2JET









































Отзывы: