User documentation MAGICFX® DMX FX Switch Pack
Page 13
It is possible to switch off the buttons for
safety reasons.
Press the Lock button down for 5
seconds to switch the buttons on or off.
The machine is locked if there is an L in the
image as pictured left.
8.
Now you can connect the machines to
the desired outputs of the DMX FX
Switch Pack.
7.
The display will now show the screen
pictured on the left.
You will see the address behind Safety flash
on and off. This is the address which can be
used for releasing the machine.
Change to the required mode by
pressing on the ▲ or ▼ button. Then
press the ‘MODE’ button to confirm your
choice.
When you use several machines it is
advisable
to use the same ‘Safety’ channel
for each DMX FX Switch Pack.
If you want to restore the addresses to
standard values then press the LOCK button
for each address. This way the address will
return to its standard value.
