Version 1.0
Page 14
11. USAGE
TIP:
Gives you suggestions and advice regarding easier or more
convenient ways to carry out certain tasks.
CAUTION:
The machine can be damaged, if you do not follow these procedures
carefully.
DANGER WARNING:
The MAGICFX® DMX FX Switch Pack may only be installed by adults
and authorised persons.
The DMX FX Switch Pack may only be operated if all parts are
completely and correctly installed/connected.
For using the DMX FX Switch Pack
take the following steps:
To get the DMX FX Switch Pack out of
the safe mode, the ‘safety’ channel on
the DMX FX Switch Pack must be set
between 40% and 60%.
The LED light on the front of the DMX FX
Switch Pack now starts to flash on and
off.
Press the flash buttons of the installed
output channels on the DMX controller.
If the correct output has been chosen
the machines connected to the DMX FX
Switch Pack are now powered.
Consult the manual of the machine for the
correct use of the DMX controller.
After using the DMX FX Switch Pack the
machine must be put back in the safe
mode.
Put the DMX FX Switch Pack in the safe
mode by closing
the ‘Safety’ channel or
by giving it a value outside the 40-60%
range.
The DMX FX Switch Pack does not work
when it is in the safe mode.
1.
