Maggi BS 46, Оригинальное руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 56

19. SERVICING
18. WOODWORKING EXAMPLES
17.6 HOW TO USE REFERENCE PIN TO BORE SETS OF HOLES IN A ROW
(optional)
As it can be complicated to use the extension fence to bore sets of holes rows on large
pieces, our boring machines can be equipped with reference devices to be positioned
on the machine sides. Aligned with the drills at a multiple distance (32-mm system), the
pin (1) is a rapid and safe reference to carry out this type of boring. When the reference
pin is not used, it fits into a slot under the table. To resume piece boring operations, the
reference pin can be used once again by turning the knob (2) to unlock the spring that
allows the reference pin to come out. The reference pin has to be inserted into one of
the previously bored holes to make it possible for another series of holes row at con-
stant pitch to be bored (paragraph 17).
Page
19
19.1 INSULATION PROCEDURE
MAINTENANCE:
 Disconnect the machine from any energy sources: the electrical power supply and the
pneumatic air supply must be cut off and blocked
 Check that any residuals energy has been actually consumed before performing any
maintenance interventions on the machine
 Any maintenance operation must be performed only by specialized and/or authorized
personnel
 Put on the machine a tag (sign), in a place easy to be seen, saying that the machine is
under maintenance anc can not be used for working
MAINTENANCE:
A SUITABLE MAINTENANCE IS A DECISIVE FACTOR FOR INCREASED LIFE OF THE MACHINE,
AND TO HAVE OPTIMAL WORKING CONDITIONS
DPI - WEAR
PROTECTIVE
CLOTHES
DPI - WEAR
PROTECTIVE SHOES
DPI - WEAR
PROTECTIVE
GLOVES