Magellan Trailblazer, Справочное руководство

Страница: 30 / 41

ARROW to highlight "REVERSE ROUTE." (Since a route has
been entered, both "REVERSE ROUTE" and "CLEAR ROUTE"
are now options.) Press ENTER, and the route is autotmatically
reversed.
READING THE POINTER DISPLAY
The receiver has three different navigation displays. Navigation (the central
display of the NAV/ROUTE key), Navigation2 (NAV, UP ARROW) which
displays navigation information textually, and the Pointer display (NAV,
DOWN ARROW), which displays the information graphically.
As explained in the
Field Guide,
the Pointer screen displays only bearing and
distance to the destination until you start moving, when it becomes both a
compass and a direction indicator that will graphically point you toward your
destination.
The example on the following page illustrates how to use this display
when navigating on a route.
DIRECT-TO
A Direct-To route is a 1-leg route from the present position to any waypoint.
The receiver must have an initial position or a current position fix to use this
feature.
To enter a Direct-To route:
1. Press NAV/ROUTE and the RIGHT ARROW. The receiver displays
MOB and the waypoint library. (The FROM-waypoint is always the
present position.)
2. Press the DOWN ARROW to select the TO-waypoint, then press
ENTER.
Since you already set a route, the receiver asks if you want to delete
the current route. Select YES to delete the route and continue on the
Direct-To route, or NO to remain on the current route.
26