manualshive.com logo in svg

Magellan Trailblazer XL, Справочное руководство

Поделиться
Скачать
Magellan Trailblazer XL Скачать руководство пользователя страница 79

Magellan Systems Corporation 

Limited Warranty 

All Magellan GPS receivers are navigational aids, and are not intended to replace other 
methods of navigation. Purchaser is advised to perform careful position charting and 
use good judgement.  Read the User Guide carefully before using this product. 

1.  MAGELLAN SYSTEMS CORPORATION WARRANTY 
Magellan Systems Corporation warrants their GPS receiver and accessories to be free of 

defects in material and workmanship for a period of one year from the date of original 

purchase.  This warranty applies only to the original purchaser of this product. 
In the event of a defect, Magellan Systems Corporation will, at its option, repair or 

replace the product with no charge to the purchaser for parts or labor. The repaired or 
replaced product will be warranted for ninety (90) days from the date of return 
shipment, or for the balance of the original warranty, whichever is longer. 

2.  PURCHASER'S REMEDY 

Purchaser's Exclusive Remedy under this written warranty or any implied warranty shall 
be limited to the repair or replacement, at Magellan Systems Corporation's option, of 
any defective part of the receiver or accessories which are covered by this warranty. 
Repairs under this warranty shall only be made at an authorized Magellan Service 

Center. 

3.  PURCHASER'S DUTIES 
To obtain warranty service, the purchaser must return the receiver or accessories 
postpaid, with proof of the date of original purchase and purchaser's return address to 
Magellan Authorized Service Centers. 

Magellan Systems Corporation will not be responsible for any losses or damage to the 
product incurred while the product is in transit or is being shipped for repair. Insurance 

is recommended. 

4.  LIMITATION OF IMPLIED WARRANTIES 
Except as set forth in item 1 above, all other expressed or implied warranties, including 

those of fitness for any particular purpose and merchantability, are hereby disclaimed. 

Some states do not allow limitations an warranties, so the above limitation may not 
apply to you. 

5.  EXCLUSIONS 
This warranty does not cover the following: 

•  Installation 

•  Batteries 

•  Finishes 

•  Defects resulting from installation 
•  Any damage due to accident, resulting from inaccurate satellite transmissions. 

Inaccurate transmissions can occur due to changes in the position, health, or 
geometry of a satellite. 

•  Any damage due to shipping, misuse, negligence or tampering, or improper use. 

•  Servicing performed or attempted by anyone other than an authorized Magellan

. 

 

Service Center representative. 

Содержание Trailblazer XL



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды