manualshive.com logo in svg

Magellan Trailblazer XL, Справочное руководство

Поделиться
Скачать
Magellan Trailblazer XL Скачать руководство пользователя страница 55

Courseline 

STE 

is steering. Steering is the correction in heading that must be made to return to 

course. lt is expressed as bearing. 

TTG 

is time to go. 

ETA 

is estimated time of arrival. These are the only measurements 

that output a time value. TTG is the time remaining to reach the next destination 

landmark (the leg's destination), based on the current SOA and distance remaining. If 
SOA is 30 knots and there are 45 NM remaining to the destination landmark, TTG is 

01:30:00 (1 hour, 30 minutes). 

ETA also uses SOA and distance remaining, but it computes the clock time at which 
you can expect to arrive at the route's destination. Using the figures above and a 
current time of 02:30 PM, the ETA would be 4:00 PM. 

The other navigation screens provide information graphically. The 

STEERING 

and 

POINTER 

screens, for example, both provide the bearing and heading. 

46 

GPS Navigation 

DMG 

is distance made good. The same example illustrates DMG. Even though the

boat moved 17 NM, because of the cross track error only 15 NM can be applied to
arriving at the buoy. 

The distance that is applied to the original course (A

1

-B

7

) is

referred to as DMG. 

In this example, DMG is 15 NM.

VMG 

is the velocity made good. lt is the portion of the velocity (speed) that is in the

direction of the destination. In the examples above, the boat is travelling directly
toward the buoy, even though it is not on the planned course. All of the boat's
velocity is being applied toward arriving at the destination (here, VMG = SPD).

If the boat travels parallel to the planned course as in this illustration (from A to B), the

boat's track would not intercept the destination. As the boat moves along, less and
less of its velocity would be applied toward arriving at the destination. At point D, no
velocity is applied to reaching the buoy. At point 

E

, 

VMG is a negative value since the

boat is moving away from the destination.

Содержание Trailblazer XL



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды