Magellan Trailblazer XL, Справочное руководство

Страница: 44 / 82

Press ENTER. The receiver automatically uses
the destination of the first leg as the start of
the second leg. Once the first leg is established,
you will select only the destination of the fol-
lowing legs. Use the RIGHT/LEFT ARROW to
display the destination for leg 2 and press
ENTER.
Continue to add legs to the route. (You may
have up to 24 legs.) When you are ready to
end the route, just press ENTER while TO is
blank. If you use all 24 legs, the route will
automatically end when the destination of the
last leg is entered.
In this example, we used an EMPTY route. If we had selected a defined route, the
receiver would have displayed a warning asking if we wanted to replace the existing
route with a new one.
Activating and Deactivating Routes. Only one route (multileg, BACKTRACK, GOTO,
or MOB) can be active (in use) at any time. A multileg route is automatically activated
when you create it; so are the BACKTRACK, GOTO, and MOB routes. Any route that is
active when another route is created will automatically be deactivated.
Multileg routes can also be activated and deactivated through the Route Menu.
Press GOTO, LEFT ARROW. If a multileg route is active, press the LEFT AR-
ROW again to reach the Route Menu.
Use the UP/DOWN ARROW to highlight the
desired route and press ENTER. Notice that
this menu has more options than the one we
saw earlier. Once a route has been created,
additional options become available.
Using Your Magellan Receiver 35