manualshive.com logo in svg

Magellan Trailblazer XL, Справочное руководство

Поделиться
Скачать
Magellan Trailblazer XL Скачать руководство пользователя страница 29

Satellite Status. Satellite Status displays the locations of each available satellite, rela-
tive to your location. 

Press the  DOWN ARROW. LEFT ARROW 
from the Location 1 screen. The satellites 
whose numbers are highlighted are the ones 
being used for location fixes. 

Satellite location is described by height above the horizon, or elevation, and location 

relative to north, or azimuth. Both values are expressed in degrees. The outer circle 

represents the horizon, or 0° elevation. The next circle is 45° elevation. The center of 

the two circles is 90° elevation, or directly above your location. Azimuth is measured 

from north (at the top of the screen) in a clockwise direction. In the example shown, 
satellite 26, which is being used in the location fix, has an elevation of about 20° and 
an azimuth of 180° (true or magnetic; depending on which you selected in SETUP). 
Satellite 5 is at 0° elevation and 135° azimuth. 

Sun/Moon Cycle. The receiver will compute the sunrise/sunset and lunar cycle for the 

present location on the date you select. 

Press the DOWN ARROW, RIGHT ARROW 
from the Location 1 screen. The cursor is ac-
tive on the date. Key in the desired date and 
press ENTER.  After a moment, the receiver 
displays the time of sunrise and sunset, and 
which phase the moon will be in on the se-
lected date. 

Last Location Buffer. Fixes are regularly saved to the Last Location buffer — how 

often they are saved you select in Setup. The fixes in the buffer are called the Last Loc 
fixes. They can be viewed and saved as landmarks. They can also be used to compute 
how far you've travelled between two selected locations. 

Press the LEFT ARROW from the Location 1 
screen. Last Loc fixes are given temporary 
names in the LLC plus a number. The 
higher the number, the older the Last Loc fix 
is. Fix +LLC18 is older than +LLCO2. 

20 

Using Your Magellan Receiver 

Содержание Trailblazer XL



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды