background image

Magellan NAV 6000

13

Press 

INSERT

.   As you begin

moving the cursor, two dashed
lines are displayed showing

how the route is being
changed.

When you are satisfied with the lo-
cation of the cursor, press 

ENTER

.

If there is an existing waypoint at
that position, it will be used in the
route, if not, the Insert Waypoint
window will be displayed.  This
window behaves like the other
MARK CURSOR POSITION
windows presented in this tutorial.

Pressing 

DONE

 accepts the

new waypoint and the route
now resembles the one at the
right.

Removing a Waypoint. 

An-

other common editing function
is removing a waypoint from a
route.  Move the cursor to the
waypoint to be removed from
the route.  (Please note that the
waypoint is not removed from the
receiver’s memory, but only from
this route.)

MARK CURSOR POSITION

Name:

Type:

DESCRIPTION:

CURSOR

WPT004

 

33`01.08

N

117`38.63

W

MAR/17/97 03:39:03 PM

  0

F

T

n

m

n

m

°

WPT001

WPT002

WPT003

ENTER to insert Quit to exit

FROM:WPT002  SCALE 90.0

BRG 

151

      DST 

16.1

CURSOR

33 01.08 N  117 38.63 W

n

m

n

m

°

WPT001

WPT002

WPT003

ENTER to append Quit to exit

TO: WPT004   SCALE 90.0

BRG 

151

      DST 

16.1

CURSOR

33

°

 01.08 N  117

°

 38.63 W

MANUAL

MOVE

INSERT

REMOVE

WPT004

n

m

n

m

°

WPT001

WPT002

WPT003

ENTER to append Quit to exit

TO: CURSOR   SCALE 90.0

BRG 

212

      DST 

0.58

CURSOR

33 16.14N   117 44.35 W

MANUAL

MOVE

INSERT

REMOVE

WPT004

°

°

Содержание NAV6000















































































































Отзывы: