
WASP Series User Manual rev 2.1
7
M
AG
AU
D
IO
1. Safety instructions
1. Read these instructions carefully.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install following
the manufacturer’s instructions.
8. Do not use near heat sources such as stoves, heat
registers, radiators, or other equipment (including
amplifiers) that produces heat.
9. Do not use the unit near open fire sources.
10. Connect the unit only to the electric network
with grounding. Use only electric plugs that provide
grounding.
11. Protect the power cord from being walked on,
pinched, or otherwise damaged.
12. Use only accessories specified by the manufacturer.
13. Unplug this unit during lightning storms or when
unused for long periods.
14. Refer all servicing to qualified service personnel.
Servicing is required when the system has been
damaged in any way, such as a power supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the unit, the unit has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
15. WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS SYSTEM
UNIT TO RAIN OR MOISTURE.
INSTALLING THIS UNIT MUST BE PERFORMED ONLY
BY QUALIFIED TRAINED PERSONNEL FOLLOWING
APPLICABLE SAFETY RULES. DO NOT ALLOW
INSTALLATION OF THIS UNIT IF INSTALLATION
HARDWARE IS BROKEN, BENT, PARTS ARE MISSING
OR IS OTHERWISE DAMAGED.
The triangle with the lightning bolt is used to alert the
user to the risk of electric shock.
The triangle with the exclamation point is used to
alert the user to important operating or maintenance
instructions.
The CE mark indicates compliance with the low voltage
and electromagnetic compatibility.
The symbol for earth/ground connection.
A symbol indicating that the equipment is for indoor use
only.
Symbol for conformity with Directive 2002/96/EC and
Directive 2003/108/EC of the European Parliament on
waste electrical and electronic equipment (WEEE).
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT ATTEMPT TO OPEN ANY PART OF THE
UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS APPARATUS
FROM THE AC MAINS, DISCONNECT THE POWER
SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
THE MAINS PLUG OF THE POWER SUPPLY CORD
MUST REMAIN READILY ACCESSIBLE.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE, DRIPPING OR SPLASHING LIQUIDS.
OBJECTS FILLED WITH LIQUIDES, SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
CONNECTIONS TO THE MAINS SHALL BE DONE ONLY
BY AN ELECTRO-TECHNICALLY SKILLED PERSON
ACCORDING TO THE NATIONAL REQUIREMENTS OF
THE COUNTRIES WHERE THE UNIT IS SOLD.
EXPLANATIONS OF GRAPHICAL SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SA
FE
T
Y
IN
STR
U
C
TI
O
N
S
Содержание WASP-8
Страница 1: ...User Manual EN Systems WASP 8 WASP S12 discontinued WASP S15 WASP S18 WASP SERIES...
Страница 3: ...WASP Series User Manual rev 2 1 3 MAG AUDIO CONTENTS...
Страница 5: ...WASP Series User Manual rev 2 1 5 MAG AUDIO WSF 02 Bump WASP H DIMENSIONS...
Страница 6: ...WASP Series User Manual rev 2 1 6 MAG AUDIO Bump WASP L DIMENSIONS...