MAG WASP-8, Руководство пользователя, Страница: 19 / 28

WASP Series User Manual rev 2.1
19
M
AG
AU
D
IO
5.1.10. Building the ground stack using
the Bump-WASP-L frame
- Remove holding pin and remove the mounting
plank of the Bump-WASP-L frame (1).
- Remove two lower side pins of the Bump-WASP-L
frame (2).
- Install the Bump-WASP-L frame onto the
WASP-S12/S15/S18 subwoofer. Insert the two side
pins of the Bump-WASP-L frame. Use the winch
to secure the Bump-WASP-L to the M20 socket of
the subwoofer (3).
- Position the WASP-8 module on top of the Bump-
WASP-L frame. Remove two upper side pins of the
Bump-WASP-L frame. Remove the rear holding pin
of the WASP-8 module and release the rear link (4).
- Install the WASP-8 module onto the Bump-
WASP-L frame. Insert the two side pins of the
Bump-WASP-L frame. Secure the WASP-8’s rear
link with the pin. (5).
You can choose between 0°, 2,5°, 5° and 7,5° for
front tilt of the WASP-8 cabinet. For additional tilt
angle, use the Bump-WASP-Ext15 accessory (refer
to 5.1.11).
1
2
5
3
4
SY
ST
EM
S O
P
ER
A
TI
O
N