MAG WASP-8, Руководство пользователя, Страница: 20 / 28

WASP Series User Manual rev 2.1
20
M
AG
AU
D
IO
5.1.11. Using the Bump-WASP-Ext15 angle
extension
Bump-WASP-Ext15 can provide up the 15° of the
frontal tilt of the WASP-8 module when building
the ground stack using Bump-WASP-L, WSF-02 or
Bump-WASP-H mounting frame.
- Bump-WASP-Ext15 is attached to the rear link of
the WASP-8 cabinet (1).
- Release a pin holding the rear link of
the WASP-8 cabinet. Release a pin of the
Bump-WASP-Ext15 (2).
- Install the Bump-WASP-Ext15 onto the rear link
of the WASP-8 module. Secure using the pin (3).
- Tilt the WASP-8 module and install it’s rear link
with connected Bump-WASP-Ext15 into the
ground stack mounting hole of the mounting
frame (4).
When using the Bump-WASP-Ext15, the ground
stack mounting holes of the Bump-WASP-L or
Bump-WASP-H provide following frontal tilt
angles:
- 0° hole: 7,5° tilt
- 2,5° hole: 10° tilt
- 5° hole: 12,5° tilt
- 7,5° hole: 15° tilt
1
3
2
5 4
SY
ST
EM
S O
P
ER
A
TI
O
N