MAG WASP-8, Руководство пользователя, Страница: 24 / 28

WASP Series User Manual rev 2.1
24
M
AG
AU
D
IO
5.2.1. Connection plate and sticker plate
1. SERIAL NUMBER FIELD. The sticker with the
system’s serial number is located here. NEVER
REMOVE THE SERIAL FROM THE SYSTEM, AS IT
IS AN IMMEDIATE WARRANTY VOID.
2. PARALLEL INPUTS. The pair of parallel Neutrik®
Speakon connectors. Use these connectors to
connect the power amplifier and to feed the signal
to the parallel systems.
5.2.2. Passive connections
Suggested accessories:
CN-0021 (part No. 00-00004268)
CN-0031 (part No. 00-00004271)
CN-0032 (part No. 00-00004272)
Use a power amplifier with DSP or power amplifiers
with an external speaker processor with the WASP
line array.
MAKE SURE TO USE A HIGH-PASS FILTER
FOR WASP TO PREVENT EXCESSIVE CONE
MOVEMENT, RESULTING IN TRANSDUCER
DAMAGE OR FAST DETERIORATION.
Recommended HPF settings, suggested power
amplifier ratings and connection pins are in the
table below.
System Amplifier power Amplifier impedance Connection pins Recommended HPF
WASP LF 600 - 1200 W 16 Ohm +1 -1 Specified by preset
WASP HF 100 - 200 W 16 Ohm +2 -2 Specified by preset
WASP-S12 950 - 1900 W 8 Ohm Rear +1 -1 Specified by preset
WASP-S12 Link Rear +2 -2
WASP-S12 Link Front +1 -1
WASP-S12 950 - 1900 W 8 Ohm Front +2 -2 Specified by preset
WASP-S18 1300 - 2600 W 8 Ohm Rear +1 -1 Specified by preset
WASP-S18 Link Rear +2 -2
WASP-S18 Link Front +1 -1
WASP-S18 1300 - 2600 W 8 Ohm Front +2 -2 Specified by preset
WASP connection plate and sticker plate
1
2
2
5.2. Connection
WASP line array passive connections
DSP AMPLIFIER
WASP module
WASP module
WASP module
WASP module
5.2.3. Connection details
1+/1-2 +/2- 1+/1-2 +/2-
SY
ST
EM
S O
P
ER
A
TI
O
N