AV9010
2 060817
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT
SAFETY INFORMATION.
It is the responsibility of the owner to make sure all personnel read
this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels
are lost or not legible, contact Mac Tools for replacements. If the
operator is not fluent in English, the product and safety instructions
shall be read and discussed with the operator in the operator's
native language by the purchaser/owner or his designee, making
sure that the operator comprehends its contents.
• Read, study, understand & follow all instructions before using.
• Always operate, inspect and maintain this tool in accordance with
American National Standards Institute Safety Code for Portable
Air Tools (ANSI B186.1) and any other applicable safety codes and
regulations.
• For safety, top performance and maximum durability of parts, operate
this tool at 90 psig/6.2 bar max air pressure with 5/16" diameter air
supply hose.
• Always wear impact resistant eye & face protection (Users &
Bystanders) when operating or performing maintenance on this tool .
• Always wear hearing protection when using this tool (Users &
Bystanders). High sound levels can cause permanent hearing loss.
Use hearing protection as recommended by your employer or OSHA
regulation.
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel must be physically able to handle
bulk, weight and power of this tool.
• Keep tool out of reach of children.
• Air powered tools can vibrate during use. Extended exposure to
vibration, repetitive motions or uncomfortable positions during use
may be harmful to your hands and arms. Discontinue use of tool if
discomfort, tingling feeling or pain occurs. Seek medical advice before
resuming use.
• Compressed air can cause severe injury. Never direct air at yourself or
others. Always turn off the air supply, drain hose of air pressure and
detach tool from air supply before installing, removing or adjusting any
part or accessory on this tool, or before performing any maintenance on
this tool. Failure to do so could result in injury.
• Whip hoses can cause serious injury. Always check for and replace
immediately any damaged, frayed or loose hoses and fittings.
• Do not operate a damaged or worn tool. Do no use quick-detach
couplings at tool. See instructions for correct set-up.
• Place the tool on the work before starting the tool. Do not point or indulge
in any horseplay with this tool.
• Slipping, tripping and/or falling while operating air tools can be a major
cause of serious injury or death. Be aware of excess hose left on walking
or work surface.
• Keep body working stance balanced and firm. Do not overreach when
operating this tool.
• Anticipate and be alert for sudden changes in motion during use of any
power tool.
• Do not carry tool by hose. Protect the hose from sharp objects and heat.
• Avoid direct contact with accessories during and after use. Gloves will
reduce the risk of cuts or burns.
• Keep away from end of tool. Do not wear jewelry or loose clothing. Secure
long hair. Scalping can occur If hair is not kept away from tool and
accessories. Choking can occur if neckwear is not kept away from tool
and accessories.
• This tool is not insulated against electric shock.
• This tool must not be used in explosive atmospheres.
• Do not lubricate tools with flammable or volatile liquids such as
kerosene, diesel or jet fuel.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace any damaged labels.
•
Do not vacuum any liquids.
• Use replacement parts and accessories recommended by Mac Tools.
• Servicing and repairs should only be made by an authorized service
center.
• Do not use (or modify) the tool for any other purpose than that for which
it was designed without consulting the manufacturer's authorized
representative.
• Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out
microscopic particles.
• This product may contain one or more chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling.
• Failure to heed these warnings may result in serious or fatal personal
injury and/or property damage.
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
WARNING INFORMATION
