Mafell ZB 100 ES, Оригинальная инструкция по эксплуатации

Страница: 17 / 34

-17-
6 Troubleshooting
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
7 Optional accessories

Supplementary handle, cpl. Ref. No. 039 203
8 Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
The determination of the causes of existing defects and their elimination always require
increased attention and caution. Pull out the mains plug beforehand!
Defect Cause Elimination
Machine cannot be switched on No mains voltage Check power supply
Carbon brushes worn Take the machine to a MAFELL cus-
tomer service shop
Machine stops while cutting is in pro-
cess
Mains failure Check mains back-up fuse
Tool jams Blunt cutting edges Replace the knives, reverse or
resharpen them