Mafell KSS40 18 M bl, Инструкция по эксплуатации и безопасности

Страница: 19 / 97

KSS40 18 M bl
01/2022 19
5. Insert the Allen key (B) into the flange screw
(12) and turn it
counterclockwise until the saw
shaft engages in the locking device.
➢ The saw blade is retained in position and
the flange screw can be released.
6. Using the Allen key (B), turn the flange screw
(12)
counterclockwise to loosen it.
➢
You can now release the locking pin.
7. Remove the flange screw (12) and the front
clamping flange (13).
8. Remove the old saw blade.
➢ Clamping flanges must be free of adhering
parts!
➢ The new saw blade can now be installed.
Fig. 10: Removing the old saw blade
9. Position the new saw blade (14) on the rear
flange (16).
➢ Ensure that the direction of rotation is
correct when you install the saw blade.
The saw teeth or the arrow on the saw
blade (14) must point in the direction of the
arrow (15) on the machine.
10. Fit clamping flange (13) and flange screw (12).
Fig. 11: Replacing the saw blade