MAESTRO WIRELESS SOLUTIONS
| Network
92
E-SERIES | USER MANUAL VERSION 2.0.1
http://support.maestro-wireless.com
default.
Use builtin IPv6 -
management
Allows to use the built in IPv6 management
configuration.
Enable
IPv6
negotiation
on
PPP link
Click to enable IPv6 negotiation on PPP link.
Modem
init
timeout
Enter the maximum wait time in seconds for the
modem to become ready.
The default modem initiation timeout 20 seconds.
Use
default
gateway
Click to configure a default gateway route.
None of the gateway routes are configured by
default.
Use
gateway
metric
Enter the gateway metric.
The default metric is 1.
Use DNS server
advertised by peer
Allows the router to advertise the DNS server
address.
Use DNS server advertised by peer for 3G
interface is checked by default.
LCP echo failure
threshold
Presume peer to be dead after configured LCP
echo failures. Use 0 to ignore failures.
LCP echo interval
This is time the router should wait before sending
an echo request to check whether the link is alive
or not.
The LCP echo interval by default is 20 seconds.
Inactivity timeout
The Router will wait for the LCP echo request
response for the LCP Echo interval defined after
every attempt. It declares LCP link as closed if it
does not receive response after this defined period
of attempts
Use 0 seconds to persist the connection.
Table 11.1-7: Advance Configuration of CELLDHCP Interface