MAESTRO WIRELESS SOLUTIONS
| Services
206
E-SERIES | USER MANUAL VERSION 2.0.1
http://support.maestro-wireless.com
Events
Services > Events
E200 Router is equipped with two digital inputs/outputs (I/O). Digital inputs range
is 3V to 24V and the same input pins are also available to be used as open collector
digital output with maximum 200mA @ 24V. Event page allows you to mapping
actions to events respective to digital I/O’s.
Screen 12.6-1: Event Service Configuration
Parameters
Description
EVENT
Enable
Click to enable the events
Event
Select the event from the available options
DIO_H - A high to low voltage transition
DIO_L – A low to high voltage transition
NA
DIO is by default set to a low level that means the
high
voltage
level,
pulled
up.
Note
Only one DIO (Digital input) is
available.
This input pin is accessible on 4 pin
Micro-fit Molex power connector. The
input pin is located below the V+ pin.
