Maestro E205XT02, Руководство пользователя

Страница: 77 / 219

MAESTRO WIRELESS SOLUTIONS | Network
76
E-SERIES | USER MANUAL VERSION 2.0.1 http://support.maestro-wireless.com
B. Interface Protocols
The Protocol configuration on the Interface General Settings page allows
configuring the protocol with respect to the router model number. The available
protocol options are:
Interface

Protocols

LAN WAN OpenVPN PPtP WWAN
Cellular/3
G
CELLDCHP
(E206)
Static
Address
      
DHCP
Client
      
Unmana
ged
      
PPTP       
PPPoE       
PPPoAT
M
      
UMTS /
GPRS
      
CELLULA
R
(E206)
      
Note

For E206 only, the cellular interface is separated between two
interfaces: CELLDHCP and “CELLULAR”. CELLDHCP is managing local
connection with cellular module inside the router.
Parameters Description
Static address
IPv4 address – Enter the IPv4 Address. This
IP Address must be used to access the Router.
The default IP Address is 198.162.1.1 for LAN.
IPv4 Netmask – Select the IPv4 Netmask.
IPv4 Gateway – Enter the IPv4 Address for
Gateway.
In case of LAN, if you do not provide any Gateway
IP Address, by default it will take the same IP
Address as that of the IPv4 LAN IP Address
(192.168.1.1).
For WAN, enter the IP Address of WAN gateway.
IPv4 broadcast – Enter the IPv4 Address for
broadcast.
Use Custom DNS servers – Click
t
o add