5.4 Debug, or further command using Smart Terminal as example
First, you can find our Hyper Terminal substitute at the following address:
http://software.maestro-wireless.
Then follow the steps:
–
Open the software, you can find the shortcut on your desktop, or access it by the Start menu > All
Programs > Maestro Wireless Solutions > Smart Terminal.
–
Once open you will have to select the good serial port configuration (By default: COM1, 115200, 8
data 1 stop, none, with hardware flow control)
–
Open the port by ticking the Port opened box :
–
Then you can type command like “AT” and check the "OK" response from the modem.
The whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
16
