4.2.2 Verizon network
The M100CDMA-V model will only work on the network of Verizon. Prior to the first activation of the
modem, make sure that a service plan has been secured with Verizon or a MVNO using their network.
The activation procedure on the Verizon network is triggered by the command ATD*22899;
The following messages will display:
+WOT1: " Programming i n Progress "
+WOTS: "SPL unlocked "
+WOTP: "PRL Download OK"
+WOTN: "NAM Download OK"
+WOTM: "MDN Download OK"
+WOTC: " Commit Successful "
+WOT2: " Programming Successful ! "
+WEND: 25
OFFLINE
RESET
4.2.3 Aeris network
To use the M100CDMA-A on the Aeris network, MDN and MIN need to be programmed (these are
provided by Aeris upon registration). All other MIP settings are programmed at the factory and should not
be modified. After the device is activated using AerPort, enter the device parameters following the steps
below, where:
XXXXXXXXXX
= Device MDN
YYYYYYYYYY
= Device MIN
Step
AT command
Response
Comment
01
AT+WSPC=1,000000
OK
SPC unlock code
02
AT +WMDN=XXXXXXXXXX
OK
MDN
03
AT+WIMI=31000YYYYYYYYYY
OK
MIN
04
AT+WCMT=1
OK
Commit changes
4.2.4 Generic modems
For the
generic
version (M100CDMA-G), the modem must have the right provisioning of the target carrier.
Provisioning can be done using software tool WPST
through the RS232 port.
Consult the carrier for setting up an account and the steps for automatic activation.
1
Wavecom Product Support Tool can be requested from Maestro Wireless Solutions
The whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
14
