3.4 Connect the DC power supply
Connect the open ending of the provided power cord to a DC supply. Refer to the following for power
supply requirement:
–
Input voltage range : 9-60V DC
–
Rated current: 350mA
!
AC-DC Adaptor
or battery
(Not included)
Solder wire
endings
Plug the molex ending of the power cable to the modem DC connector.
The modem will turn on automatically. The status indicator on the modem will be lit when power on. After
a few seconds it will go flashing slowly
The whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
12