Chapter 4
Registration to the Network
4.1 Carrier requirements
Before the modem can be use, it is necessary to supply the Mobile Equipement Identifier (MEID) of the
modem to the carrier and set up an account on their network.
4.2 First Time Activation
4.2.1 Sprint network
The M100CDMA-S model will only work on the network of Sprint. Prior to the first activation of the modem,
make sure that a service plan has been secured with Sprint or a MVNO using their network.
Sprint supports OMA-DM for the first time activation. The activation procedure will take place automat-
ically once the modem is powered on and registered onto the Sprint home network. For subsequent
service provisioning, you need to send the command AT+WDSS=1,1 to trigger the activation. The follow-
ing message will display:
+WORG: #777 << I n i t i a t e Data c a l l
+WCNT: 33
<< 1xRTT Data c a l l
+WDSI: 4
<< The Wireless CPU s t a r t s sending data to the server .
+WDSI: 6
<< The a u t h e n t i c a t i o n has succeeded , a session
w i t h the server s t a r t e d .
+WDSI: 8 ,1
<< The session w i t h the server i s f i n i s h e d .
+WEND: 29
<< Release a l l c a l l
To update the PRL, send the command AT+WDSS=1,3. The following messages display:
+WORG: #777
<< I n i t i a t e Data c a l l
+WCNT: 33
<< 1xRTT Data c a l l
+WDSI: 4
<< The module s t a r t s sending data to the server .
+WDSI: 6
<< The a u t h e n t i c a t i o n has succeeded , a session w i t h the
server s t a r t e d .
+WDSI: 8 ,1
<< The session w i t h the server i s f i n i s h e d .
+WDSI: 21 ,10 << A p r o v i s i o n i n g was made by the server w i t h
Pre ferre d Roaming L i s t (PRL)
+WEND: 0
<< Phone i s Off Line
OFFLINE
RESET
The whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
13
