Maestra
EN
8/21
Use of the hand control
How to modify programs PROGRAM MODE
Beginning
Keys to press
Display
Remarks
To switch off the unit
Press the two keys at the same time and switch the unit
ON
Welcome text during 3 seconds.
Then
The program number blinks.
To change the program if necessary
or
The new program number blinks.
To choose the movement
The display shows the new movement selected.
Successive presses on the keys
or
allows to select different movements..
To display the extension or flexion limit of the movement
or
The value blinks.
To change the limit of movement if necessary
or
The new value blinks.
To validate the new value, press another key
or wait more than 3 seconds
While the value blinks press
the or key
to change if necessary.
To record the program 10
Then
The program 10 has been recorded and the
display indicates the next program so you can
change another program.
OR
To cancel the program
The program 10 has been cancelled and the
display indicates the next program so you can
change another program.
To exit program mode, switch OFF and switch ON the unit.
To use the modified program see page 10.
KINETEC
maestra V01.0
Program 2
EMPTY
Program 10
EMPTY
DIP ExT/fle
0 prg nr10 40
40
DIP ExT/fle
20 prg nr10 40
Prona/supination
-10 prg nr 10 10
WRIST EXT/flex
-20 prg nr 10 20
WRIST+MP EXT/fle
0 prg nr10 60
Ulnar dev.Add/ab
0 prg nr10 40
Thumb opposition
0 prg nr10 90
Tpm ext/fle
0 prg nr10 50
ext/fle
0 prg nr10 40
Intrin.- ext/fle
0 prg nr10 90
dip ext/fle
0 prg nr10 40
DIP ExT/fle
20 prg nr10 70
DIP ExT/fle
SPEEd: 2
No timer
Pause low 0
Load : _ _ _ _ _ _
DIP ExT/fle
Save:+ clear:-
Program 10
Saving
Program 11
EMPTY
Program 10
clearing
Program 11
EMPTY
KINETEC
MAESTRA V01.0
