Maestra
EN
7/21
Use of the hand control
How to adjust the basic parameters of the movement?
Beginning
Keys to press
Display
Remarks
To stop the unit
Check if the hand control is not locked
(See page 5).
To choose the movement
The display shows the new movement selected
and the default settings of the upper and lower
limits of this movement.
Successive presses on the keys
or
allows to select different movements.
To display the extension or flexion limit of the movement
or
The
value
blinks.
To change the limit if necessary
Or
The new value blinks.
To validate the new value, press another key
or wait more than 3 seconds.
While the value blinks press
the or key
to change if necessary.
Or
Or to display pause in extension or flexion limit
Successive presses on this key selects the
pause at the extension or flexion limit.
To change the pause if necessary
or
The new pause value blinks.
To validate the new value press another key
or wait more than 3 seconds. The display shows the
selected mode.
The unit is ready to start with the new
parameters.
Comments:
• The values shown in the ‘Display’ column are examples.
Prona/supination
-10 STOP 5 10
dip ext/fle
20 Flex 15 70
dip ext/fle
0 Ext 94 40
dip ext/fle
20 FleX 94 40
dip ext/fle
SPEED 2
No timer
dip ext/fle
PAUSE HIGH 0
Pause low 0
LOAD _ _ _ _ _ _
dip ext/fle
PAUSE low 15
dip ext/fle
20 STOP 94 70
Prona/supination
-10 STOP 5 10
WRIST EXT/flex
-20 STOP 94 20
WRIST+MP EXT/fle
0 STOP 94 60
Ulnar dev.Add/ab
0 STOP 94 40
Thumb opposition
0 STOP 94 90
Tpm ext/fle
0 STOP 94 50
ext/fle
0 STOP 94 40
Intrin.- ext/fle
0 STOP 94 90
dip ext/fle
0 STOP 94 40
